RPA-Single Point Pneumatic Clutch Press
Our Products
RPA-Single Point Pneumatic Clutch Press
Standard Accessories
- Hydraulic over-load protector
- Slide adjust
- Slide adjust device
- Die Height Indicator
- Balance device
- Rotary cam switch
- Crank angle Indicator.
- Electrical Stroke Counter
- Air Source Receptacle
- Against over-run safety device
- Air ejector
- Maintenance tool box
- operation manual
Optional Accessories
- High performance wet clutch & brake
- Die cushion device
- Pneumatic die cushion device
- Foot switch
- Quick die changer device (die lifter, clamp and die arm)
- Slide knock-out device
- Power supply
- Anti-vibvration press mount
- Photo-electronic safety device
- Feeder
- Uncoiler
- Leveler
Technical Specification For "High Precision Compact Cross Shaft Power Press"
TECHNICAL DATA | UNIT | RP30 | RP40 | RP50 | RP75 | RP125 | RP160 | RP200 | AP260 | RP315 |
Rated Tonnage Point | Tons | 3.2 | 3.2 | 3.2 | 4 | 6 | 6 | 6 | 6 | 7 |
Stroke Length | mm | 70 | 70 | 80 | 120 | 180 | 200 | 200 | 250 | 25*0 |
Number of Stroke | Min | 75 | 75 | 65 | 60 | 45 | 40 | 35 | 30 | 30 |
Die Height | Min | 250 | 275 | 300 | 350 | 450 | 500 | 550 | 600 | 650 |
Slide Adjustment | mm | 50 | 55 | 60 | 70 | 80 | 100 | 110 | 120 | 120 |
Slide Are (LxRxF-B) | mm | 300×220 | 360×250 | 400×300 | 500×360 | 650×470 | 800×600 | 900×700 | 1200×800 | 1300×900 |
Baister Area (LxRxF-B) | mm | 680×300 | 800×400 | 850×440 | 900×500 | 1200×600 | 1250×800 | 1400×850 | 1500×1000 | 1600×1000 |
Bolster Thickness | mm | 70 | 70 | 70 | 90 | 110 | 125 | 140 | 150 | 180 |
Main Motor | H.P | 3 | 3 | 5 | 75 | 15 | 20 | 25 | 30 | 35 |
Slide Adjustment Motor | Kw | — | — | — | 1.1 | 1.5 | 1.5 | 22 | 22 | 2.7 |
Height from floor to bed | mm | — | 800 | 800 | 800 | 850 | 900 | 900 | 900 | 1000 |
Required Air Pressure | kg | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 |
Shank Hole | mm | 38.1 | 38.1 | 38.1 | 50 | 50 | 65 | 65 | 65 | 65 |
Die Cushion | Tons | — | — | — | 4 | 8 | 12 | 14 | 16 | 16 |
Overall Machine Size | mm | 840×1100 | 900×1200 | 950×1400 | 1000×1420 | 1290×1720 | 1390×2140 | 1500×2300 | 1700×2600 | 2000×3000 |
(LRxFBxH) | x2135 | x2345 | x2425 | x2780 | x3195 | x3670 | x3800 | x4000 | x4200 |
Characteristic
- With high rigidity design in machine frame, the machine body is welded of quality steel and treated by tension elemination, improve stability and reliability of precision of the machine.
- Keep the transmission center and machine center in uniformity guarantee the precision of pressing.
- In order to guarantee the machine running in stable and smooth, adopts the design of symmetrical two boards with balancer.
- The precision of mold adjusting up to mm, safety, reliable and convenient.
- Used reliable high sensitive clutch/break and international up-to-date twin electromagnetic valve, overloading projector can guarantee the precision of slider running and stop and sage production of the machine.
- Reasonable structural design, is benefit for automation production and reduce cost, Improve efficiency.
Applications
